All Braindump2go PDF Dumps and VCE Dumps

Braindump2go Latest and Hottest Dumps with PDF and VCE are free Shared Here!

Network ApplianceNS0-180 Exam DumpsNS0-180 Exam QuestionsNS0-180 PDF DumpsNS0-180 VCE Dumps

[2018-March-New]100% Real NS0-180 Exam PDF and VCE 70Q-Braindump2go[1-11]

2018 March New NetApp NS0-180 Exam Dumps with PDF and VCE Free Updated Today! Following are some new NS0-180 Real Exam Questions:

1.|2018 Latest NS0-180 Exam Dumps (PDF & VCE) 70Q&As Download:
https://www.braindump2go.com/ns0-180.html
2.|2018 Latest NS0-180 Exam Questions & Answers Download:
https://drive.google.com/drive/folders/1NmWvgCroaHyerAaG0uaE_FNg8mpE8ftB?usp=sharing

QUESTION 1
What is the next step if you must escalate an open case?

A. Upload the support case and core data files to NetApp Suport and to Engineering.
B. Clustered Data ONTAP triggers the AutoSupport mechanism automatically again.
C. Call NetApp Support and ask to speak to the duty manager.
D. Call NetApp Support and open a new case.

Answer: C

QUESTION 2
You want to install a new clustered Data ONTAP 8.3 system with a FA8080. The customer has unused licenses available from a clustered Data ONTAP 8.1 system.
What should be considered in this scenario?

A. You can use your licenses from the clustered Data ONTAP 8.1 system for the new clustered Data ONTAP system.
B. You must call NetApp Support for evaluation license keys.
C. You can use your license from the clustered Data ONTAP 8.1 system for about 90 days.
D. In clustered Data ONTAP 8.2 and later, use node-specific license keys that will only install on the controller for which they were purchased.

Answer: B

QUESTION 3
After proper cabling the NetApp CN1610 cluster switches, you notice that joining the second node to a cluster fails because the node is not able to communicate with the other node.
What would be the reason for this malfunction?

A. CN1610 is unsupported in newer clustered Data ONTAP versions.
B. The NTP server is not set.
C. The FASTPATH version is not supported.
D. The cluster switches must be Cisco switches for two or more nodes in a cluster.

Answer: C

QUESTION 4
You will be performing a new cluster Data ONTAP 8.3 or later installation. Which three tools would you download to facilitate this task? (Choose three.)

A. Config Advisor
B. Cluster Config Builder
C. OnCommand System Manager
D. System Setup tool
E. SLDIAG tool

Answer: ACD

QUESTION 5
Click the Exhibit button. Customer wants to modify the properties of their SPI Web services as shown in the exhibit.
What is the reason for the error?

A. The customer is trying to modify a service by specifying the wrong type of SVM (Vserver).
B. The customer is trying to modify a service that does not exist.
C. The customer is trying to modify a service by specifying the wrong service name.
D. The customer is trying to modify a service by specifying incomplete parameters.

Answer: C

QUESTION 6
You are asked to install a cluster that consists of two FAS8060 controllers and four DS2246 shelves. The customer wants two stacks of shelves (10-11 and 20-21).
According to NetApp, how many SAS cables are required to complete this installation with MPHA?

A. 10 SAS cables
B. 12 SAS cables
C. 8 SAS cables
D. 6 SAS cables

Answer: C

QUESTION 7
What is a protocol?

A. SnapRestore
B. CIFS
C. SnapMirror/SnapVault
D. FlexClone

Answer: B

QUESTION 8
According to NetApp best practices, which two sets of protocols would be assigned to the same storage virtual machine (SVM)? (Choose two.)

A. FCP, NFS
B. CIFS, iSCSI
C. NFS. CIFS
D. FCP, iSCSI

Answer: C

QUESTION 9
You are verifying multipathing from the host to the storage controller.
Which three components should you verify? (Choose three.)

A. Verify that all switch ports connected to the hosts and storage devices are online using the vendor’s GUI.
B. Verify that both FC HBA ports in the host are online using the HBA vendor’s GUI.
C. Verify that the FC HBAs WWNN’s are in the igroup in the SVM.
D. Verify that the SVM’s LIFs being used for multipathing are attached to the correct same physical FC port.
E. Verify that the storage controller FC target ports status are online with the switch port showing the FC switch to which they are connected.

Answer: ADE

QUESTION 10
You are planning to move to a newer clustered Data ONTAP version.
Which two resources should you review prior to the move? (Choose two.)

A. Software Setup Guide
B. IMT
C. Upgrade Advisor
D. System Administration Guide for Cluster Administrators

Answer: BC

QUESTION 11
A customer learns that a certain NetApp tool allows remote data collection, intelligent core file handling, and notification of down storage controllers for technical support analysis and troubleshooting.
What is the name of this tool?

A. RSA
B. HWU
C. Synergy
D. HW Assist

Answer: A


!!!RECOMMEND!!!
1.|2018 Latest NS0-180 Exam Dumps (PDF & VCE) 70Q&As Download:
https://www.braindump2go.com/ns0-180.html
2.|2018 Latest NS0-180 Study Guide:
https://youtu.be/DDcdERpgeZA